PARTS CLEANING

Cyklon parts-washing machines

Cyklon parts-washing machines are built for cleaning industrial parts. In the design, we match the drum diameter, and the way parts are fixed and placed, to the items to be washed.

You can choose from three base versions:

Key facts

All three versions of the Cyklon parts-washing machines – the rotating-drum cabin, the opening-lid cabin and the tunnel – run as closed-loop systems with water recirculation. The wash liquid reaches up to 80 °C and the wash pressure is 5–10 bar. The machines come with a 1-year factory warranty.

Wash liquid
up to 80°C
Wash pressure
5–10 bar
Load capacity
50 kg up to 3 tonnes
Warranty
1 year
THE BASICS

What is an industrial parts washer?

An industrial parts washer is an enclosed washing machine that uses heated, high-pressure wash liquid to remove oil, grease, swarf and other dirt from parts. Cyklon parts washers filter and recirculate the wash liquid, so they use less fresh water and detergent than washing by hand or with once-through water.

Cyklon Parts Drum

Industrial rotating-drum parts-washing cabin

The machine runs as a closed-loop system, recirculating the wash liquid.

The parts to be washed are placed on the movable rotating drum. The drum is then pushed to the door and rolled into the wash chamber on the matching rail track.

When the start button is pressed, the door closes automatically and the wash cycle begins. Wash time can be preset to match the level of soiling.

The drum keeps the parts turning while the nozzles spray 1,200–2,500 litres of detergent solution per minute onto them at increased pressure. This cleans the parts on every side.

A light signal shows the end of the wash cycle, after which the door opens automatically.

Included modules

  • Controlled door opening
  • Motorised drum rotation
  • Wash zone with heated tank and pump
  • Timed operation
  • Fully automatic operation (on request)
  • Solenoid-valve liquid top-up (on request)
TECHNICAL SPECIFICATIONS

Cyklon Parts Drum

* Figures are indicative and vary with configuration. Ranges run from the base Cyklon Parts Drum up to custom, larger builds.
Cyklon Parts Drum technical specifications
Housing materialPolypropylene
Dimensions1200 × 1200 × 2500 mm
Drum diameter1000 mm, up to 3,000 mm
Usable working height500–1500 mm
Number of nozzles45–80
Wash-liquid volume0.2–1 m³
Wash-liquid flow1,200–2,500 l/min
Wash-liquid temperature40–80°C
Wash pressure5–10 bar
Drum rotation speed30/min
Load capacity50 kg and up, to custom order
Part placementhung / bulk-loaded / custom
Programwash
Additional programs on requestrinse, air-blow drying
Power draw400V — 4 kW
Net weight250 kg
Warranty1 year
Custom quote
Request a quote
WHO IT IS FOR

Who is the Cyklon Parts Drum parts washer for?

The machine is the ideal choice for any plant, factory or workshop that needs high-volume, automated cleaning, degreasing and swarf removal for small or bulk-loaded parts.

The rotating-drum cabin is especially useful where:

  • hung or bulk-loaded parts need cleaning, with loads from 50 kg up to custom capacities,
  • the wash liquid has to reach every side of the parts – the rotating drum makes sure it does,
  • part sizes vary – the drum diameter can be set between 1,000 and 3,000 mm, and the usable working height between 500 and 1,500 mm,
  • the wash time should be set to match the soiling.

One wash cycle with the Cyklon Parts Drum

  1. Loading: the parts are placed on the movable rotating drum, which is then rolled into the wash chamber on the rail track.
  2. Start: when the start button is pressed, the door closes automatically.
  3. Washing: the drum turns 30 times a minute while the nozzles spray 1,200–2,500 l/min of wash liquid onto the parts at 5–10 bar and 40–80 °C.
  4. Finish: at the end of the set wash time, a light signal comes on and the door opens automatically.

Rinse and air-blow (drying) programs are available on request.

When to choose the Top or the Tunnel instead

Cyklon Parts Top: for smaller batches of parts, with a side-opening lid.

Cyklon Parts Tunnel: for continuous washing of larger numbers of parts – a 1.5–14 m tunnel with motorised transport, from pre-wash to air-blow drying.

Frequently asked questions about the Cyklon Parts Drum

What parts can it wash?

Hung, bulk-loaded or custom-fixed parts, with loads from 50 kg up to custom orders.

How big is the drum?

The standard drum is 1,000 mm in diameter; custom builds can have a drum of up to 3,000 mm.

At what temperature and pressure does it wash?

With wash liquid at 40–80 °C and a pressure of 5–10 bar.

Can it be fully automatic?

The standard version runs on a timer; fully automatic control and solenoid-valve liquid top-up are available on request.

Cyklon Parts Top

Opening-lid parts-washing cabin

A closed-loop parts washer with wash-liquid recirculation and a side-opening lid. Recommended for cleaning smaller batches of parts.

The technical data and available modules are the same as those given for the Cyklon Parts Drum rotating-drum cabin.

Who is the Cyklon Parts Top parts washer for?

The opening-lid cabin is recommended for plants that need to clean smaller batches of parts. The wash chamber closes with a side-opening lid.

The technical data and available modules are the same as for the Cyklon Parts Drum: wash liquid at 40–80 °C, 5–10 bar wash pressure, and load capacity from 50 kg.

Frequently asked questions about the Cyklon Parts Top

How is it different from the Cyklon Parts Drum? The Top is made for smaller batches of parts and closes with a side-opening lid. With the Drum, the movable rotating drum is rolled into the wash chamber on a rail track. The technical data and modules are the same.

At what temperature and pressure does it wash? With wash liquid at 40–80 °C and a pressure of 5–10 bar.

What load can it take? From 50 kg up to custom orders.

VARIANT

Cyklon Parts Tunnel parts-washing tunnel

A closed-loop parts washer with wash-liquid recirculation, built largely like our crate and tray washers. The main difference lies in how the parts are fixed.

For details of how it works, see the Cyklon Box M2, Cyklon Box L and Cyklon Box XL product pages.

Part sizes and shapes can vary widely depending on the application. That is why we also design and build special parts-washing machines to custom technical requirements.

Included modules

  • Motorised part conveyor
  • Multi-stage washing available, with heated or cold tank and pump
  • Flow-through rinsing
  • Air-blow liquid removal
* The figures are indicative. The tunnel's size and equipment are always matched to the size of the parts to be washed and to the application.
Parts-washing tunnel technical specifications
Dimensions1100 × 1500 × 1500–14000 mm
Tunnel length1,500–14,000 mm
Usable working height500 mm
Number of nozzles40–360
Wash-liquid volume100 L – 1.5 m³
Wash-liquid flow400–1,200 l/min
Wash-liquid temperatureup to 80°C
Wash pressure5–10 bar
Part transportbelt-driven rail track
Load capacity50 kg – 3 tonnes
Part placementhung / bulk-loaded / custom
Programpre-wash, wash, rinse, flow-through rinse (disinfection), air-blow drying
Power draw400V, 2–12 kW
Net weight150 kg – 1.5 tonnes
Warranty1 year
Custom quote
Request a quote

Who is the Cyklon Parts Tunnel parts-washing tunnel for?

The tunnel is recommended for plants that need continuous washing of larger numbers of parts, where:

  • parts need to be carried through the wash sections by motorised transport on a belt-driven rail track,
  • heavier parts are cleaned too – load capacity ranges from 50 kg to 3 tonnes,
  • several wash phases are needed, from pre-wash to drying,
  • the tunnel length has to suit the space and the parts to be washed: between 1.5 and 14 m.

The tunnel is built largely like our crate and tray washers; the main difference is how the parts are fixed.

Wash steps in the Cyklon Parts Tunnel tunnel

  1. Loading: hung, bulk-loaded or custom-fixed parts on the belt-driven rail track.
  2. Pre-wash
  3. Wash: 400–1,200 l/min of wash liquid, 5–10 bar, up to 80 °C, through 40–360 nozzles.
  4. Rinse
  5. Flow-through rinse (disinfection)
  6. Air-blow (drying)

The number of phases and the water tanks (heated or cold) can be matched to your needs.

When to choose the Drum or the Top instead

Cyklon Parts Drum: if you want to wash parts in batches in a rotating drum, and the wash liquid needs to reach every side of them as the drum turns.

Cyklon Parts Top: for smaller batches of parts, with a side-opening lid.

Frequently asked questions about the Cyklon Parts Tunnel

How long can the tunnel be? Between 1,500 and 14,000 mm, matched to the parts to be washed and the application.

What load can it take? From 50 kg to 3 tonnes.

Does it dry the parts as well? Yes, the program includes air-blow drying, which removes the liquid from the parts.

What electrical connection does it need? 400 V, with a power draw of 2–12 kW depending on the configuration.

MORE ABOUT THE MACHINES

Water recirculation, maintenance and safety

Water recirculation

A high-output pump delivers the wash liquid from the wash tank through the nozzles into the wash chamber. The soiled liquid then passes through a filter system and returns to the circuit. Recirculation reduces the need for fresh wash liquid and extends the liquid's service life.

Maintenance

The wash tank's opening lid gives easy access to the filter tray and filter drum. Both can be removed and cleaned easily. The inside of the wash tank is also easy to reach, so the tank can be cleaned thoroughly too.

Safety

The machine has several built-in safety features:

  • Float switch: protects the pump and heating elements from dry-running.
  • Two-stage filter system: stops dirt from reaching the moving parts.
  • Emergency stop: lets you stop the machine quickly.
  • Overheat protection: helps prevent problems caused by overheating.

The emergency stop and overheat protection are standard equipment.

Markings and certificates

CE marking
Mertkontroll certificate
Cyklon Box XL Crate Washer

Got a custom-sized or shaped part?

Tell us the size and weight of the parts, the volume and the type of soiling — and we'll recommend the right configuration.

Get in touch
Fruit & Vegetable Washer